Ceramic Fiber Products will inevitably be bumped, contaminated, and have some factors that reduce their service life during long-term operation. Regular and correct maintenance of ceramic fiber modules, blankets, and boards during their service life can greatly extend the service life of refractory fiber products and improve their refractory insulation performance.

1.Material selection

The premise of ensuring long service life - first choose Ceramic Fiber Products with better quality, because high-quality ceramic fiber blankets, ceramic fiber boards, etc. are generally specially processed during the production process, which can provide anti-fouling, dust-proof and wear-resistant guarantees.

2.Inspection and prevention

During the construction, installation and use of ceramic fiber boards，blankets and other products, frequent inspection is an important step in prevention work.

1. Before installing Ceramic Fiber Products, check whether the fiber products are intact and whether they are polluted by rainwater. If so, discard them. It is difficult to dry those that have been soaked in water. Even if they are dried, they will have a certain impact on the thermal conductivity of ceramic fibers, and the insulation effect will be reduced. Therefore, users of Ceramic Fiber Products, especially large-volume users, such as tunnel kiln customers, heat treatment kiln customers, etc., must take rain and moisture-proof measures in advance before purchasing refractory insulation materials.

2.If any damage is found during the use of Ceramic Fiber Products, it should be handled in time to minimize the loss as much as possible.

3.Regular maintenance

After the user installs the ceramic fiber products, in order to increase the wind erosion resistance of the fiber on the module surface and work for a longer time without surface damage, we can spray a layer of high temperature resistant curing agent on the module. The curing agent is composed of inorganic binders, dispersants, additives and other materials. The surface after curing becomes a ceramic hard shell, which can improve the anti-erosion performance of the fiber lining and the shaping of the lining, and extend the service life of the fiber lining of the kiln. The curing agent cures in 12 hours at room temperature and about 2 hours in a drying (100℃) environment.

If you would like to find out more about Ceramic Fiber Products or to purchase Ceramic Fiber Products, please contact us at commercial@weitengroup.com, wwww.weitengroup.com.